This is a site for discussing roleplaying games. Have fun doing so, but there is one major rule: do not discuss political issues that aren't directly and uniquely related to the subject of the thread and about gaming. While this site is dedicated to free speech, the following will not be tolerated: devolving a thread into unrelated political discussion, sockpuppeting (using multiple and/or bogus accounts), disrupting topics without contributing to them, and posting images that could get someone fired in the workplace (an external link is OK, but clearly mark it as Not Safe For Work, or NSFW). If you receive a warning, please take it seriously and either move on to another topic or steer the discussion back to its original RPG-related theme.

Now THIS is a map

Started by JongWK, December 28, 2007, 02:16:35 AM

Previous topic - Next topic

Settembrini

Okay, so I was right at calling it plywood.
I´m also not aware of particle board that would be under a centimeter strong.

Also this:


could do the job.


When I´m thinking about particle board, I´m talking about this:



That´s definitely heavier than plywood.


I´m a plywood person. It´s easy to work with, takes the wallpaper glue well feels good, looks good and is pretty light.
If there can\'t be a TPK against the will of the players it\'s not an RPG.- Pierce Inverarity

James J Skach

Yup, and actually, the first picture you provide is called OSB - Oriented Strand Board. It's usually used as the flooring base and/or roofing material. It's good for this as while strong and cheap, it's rough and nothing to look at, so it's used under things.

And yeah, the other ones are what I'm talking about when I say particle board.

I'm a plywood guy myself - and a nice thin but not cabinet grade would work fine for the map.  So would, in all honesty, jut about any thin board would work.  The advantage of at least a couple of plys is that it won't warp...or will at least resist it...
The rules are my slave, not my master. - Old Geezer

The RPG Haven - Talking About RPGs

pspahn

Okay, my mistake.  Apparently one of the things we call "particle board"  where I live is actually called oriented strand board.  

http://images.google.com/imgres?imgurl=http://www.rd.com/images/tfhimport/2002/Feb02_Which_Should_I_Buy/20020201_Which_Should_I_Buy_page003img001.jpg&imgrefurl=http://www.rd.com/familyhandyman/content/19557/&h=299&w=377&sz=20&tbnid=MA1bjwWyD1RgZM:&tbnh=97&tbnw=122&prev=/images%3Fq%3Doriented%2Bstrand%2Bboard%26um%3D1&start=2&sa=X&oi=images&ct=image&cd=2

http://www.gp.com/BUILD/productgroup.aspx?pid=5843

This is not the cabinet grade stuff, but is used in flooring and roofing.  It's rougher than 1/4" plywood, but cheaper and lighter.  I just built a little play area for my daughter and used OSB (and shingles) to roof the tree fort (about $6 as opposed to $11).  

Pete

EDIT:  What James said.  :)
Small Niche Games
Also check the WWII: Operation WhiteBox Community on Google+

GrimJesta

Quote from: HinterWeltA dowel along the top with holes drilled in the ends allowing a light weight nylon rope through. Tie off the ends to the dowel then drive a picture hanger hook or use a 3m detachable hook to hang it on the wall.

Bill

 I like that one best since it'd add to the anachronistic feel... uh... sorta.

-=Grim=-
Quote from: Drohem;290472...there\'s always going to be someone to spew a geyser of frothy sand from their engorged vagina.  
Playing: Nothing.
Running: D&D 5e
Planning: Nothing.